Your current browser is not (yet) supported

Slurry Fittings

1 From 4
No results were found for the filter!
Welding bend 90°, DIN 2605 Welding bend 90°, DIN 2605
The Welding bend 90°, DIN 2605 is a welding fitting in black steel it is a 90 degrees butt welding bend. The fitting has a butt welding connection. The fitting is available in a wide range of sizes. The Welding bend 90°, DIN 2605 is made...
From £ 1.45 *
  • Connection: butt welding
  • Material: steel
  • DIN Standard: DIN 2605
Backing flange, round Backing flange, round
The Backing flange, round is a backing flange with SQ flange PCB standards for PVC stub flanges. It has a galvanised surface treatment and is available in a wide range of sizes. The Backing flange, round is made from steel.
From £ 11.60 *
  • Material: steel
  • Surface treatment: galvanised
  • Size: 110 mm x 4"
Nr. 23B - Welding nipple Nr. 23B - Welding nipple
The Nr. 23B - Welding nipple is a nr 23 pipe nipple male threaded BSP x butt welding. The fitting has a male thread x butt welding connection. The fitting is available in a wide range of sizes. The Nr. 23B - Welding nipple is made from...
From £ 0.16 *
  • Connection: male thread x butt welding
  • Material: steel
  • Size: 1/2"
Reducing weld cone, DIN 2616 Reducing weld cone, DIN 2616
The Reducing weld cone, DIN 2616 is a welding fitting in black steel also known as a butt welding reducer. The fitting has a butt welding connection. The fitting is available in a wide range of sizes. The Reducing weld cone, DIN 2616 is...
From £ 4.60 *
  • Connection: butt welding
  • DIN Standard: DIN 2616
  • Material: steel
Flange piece with flange ring Flange piece with flange ring
From £ 37.80 *
  • Connection: flange MZ x glue socket
  • Material: PVC/steel
  • Size: 6" x 160 mm
MZ grease nipple MZ grease nipple
Used for lubrication
From £ 10.90 *
  • Material: steel
  • Surface treatment: galvanised
  • Size: 8"
Stub flange Stub flange
From £ 13.60 *
  • Connection: glue spigot
  • Material: PVC
  • Size: 125 mm
Backing flange, type MZ square Backing flange, type MZ square
The MZ Backing flange is a galvanised steel square flange with a galvanised surface treatment. The fitting is available in a wide range of sizes. The MZ Backing flange is made from steel.
From £ 7.60 *
  • Material: steel
  • Surface treatment: galvanised
  • Size: 5"
B&P Swivel joint, type 0070 B&P Swivel joint, type 0070
Housing: cast-iron G20 UNI 5007 Ball bearing-diameter: 1/2" chrome steel DIN 100 Cr6 Rings: NBR 75 shore Tolerance according to DIN 5401 1V.
From £ 245.00 *
  • Connection: flange
  • Material: cast iron
  • Size: 4"
Bend 45° Bend 45°
The Bend 45° is a slurry fitting with a SQ flange often combined with Bauer, Perrot and Italian piping systems. The fitting has a SQ flange MZ connection with a galvanised surface treatment. The fitting is available in a wide range of...
From £ 65.50 *
  • Connection: flange MZ
  • Material: steel
  • Surface treatment: galvanised
Bend 90° Bend 90°
The Bend 90° is a slurry fitting with a SQ flange often combined with Bauer, Perrot and Italian piping systems. The fitting has a flange MZ x hose tail connection with a galvanised surface treatment. The fitting is available in different...
From £ 41.90 *
  • Connection: flange MZ x hose tail
  • Material: steel
  • Surface treatment: galvanised
Bend 90° Bend 90°
The Bend 90° is a slurry fitting with a SQ flange often combined with Bauer, Perrot and Italian piping systems. The fitting has a flange MZ connection with a galvanised surface treatment. The fitting is available in a wide range of...
From £ 54.10 *
  • Connection: flange MZ
  • Material: steel
  • Surface treatment: galvanised
1 From 4
Viewed