Dripline

Close filters
 
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 6
No results were found for the filter!
Rain Bird Drip irrigation hose, type PC inline XF-D Rain Bird Drip irrigation hose, type PC inline...
The Rain Bird Drip irrigation hose, type PC inline XF-D is ideal for drip irrigation on ground cover, dense plantings, hedge rows, tress and in many other applications. The brown XF-D driphose can be fitted with the XF insert and lock...
From £ 0.43 *
  • Material: PE
Rain Bird Tie-Down stake Rain Bird Tie-Down stake
£ 0.26 *
  • Color: brown
Straight connector Straight connector
The Barb Connector from Palaplast is mostly used for irrigation installation projects where multiple pipes have to be connected together. The connector is made according to Polypropylene, which means that it is resistant to corrosion....
From £ 0.05 *
  • Material: PP
  • Color: black
  • Pressure: 4 bar
Irritec Figure 8 end closure Irritec Figure 8 end closure
2 Available Size
Irritec 8 figure is used at the end of the line to prevent the line from discharging and keeping the system full. This must be used in every drip irrigation system. Irritec is the leading Italian manufacturer of plastics and irrigation...
From £ 0.05 *
  • Material: PP
  • Color: black
Straight connector Straight connector
2 Available Size
The connector, also known as the Elysée Safety Coupling, is a light weight fitting that is mostly used for irrigation networks and low-pressure conveyance of water. This Elysée fitting is suitable for potable water supply systems. The...
From £ 0.14 *
  • Material: PP
  • Color: black
  • Type: safety
T-piece 90° T-piece 90°
The Barb connector T-piece 90°, also known as the Palaplast Indented Tee, is a fitting with a barb connection. It is used for angular line installation for the agriculutral sector. The fitting connects three pipes through a coercive...
From £ 0.09 *
  • Material: PP
  • Color: black
  • Pressure: 4 bar
T-piece 90° T-piece 90°
The Reduced barb connector T-piece 90°, also known as the Palaplast Reducing Indented Tee, is a fitting with a reduced barb connection that is suitable for PE 40 pipes. All diameters of the fitting correspond to the outside diameter of...
From £ 0.15 *
  • Material: PP
  • Color: black
  • Pressure: 4 bar
Y-piece Y-piece
All diameters correspond to the outside diameter of PE pipes.
From £ 0.82 *
  • Material: PP
  • Color: black
  • Pressure: 4 bar
Y-piece Y-piece
The Barb connector 3-way Y-piece is known to be UV resistant and relatively easy to install. Furthermore it is made from Polypropylene material which makes it a very durable one-piece construction. All diameters of the fitting correspond...
From £ 0.92 *
  • Material: PP
  • Color: black
  • Pressure: 4 bar
Hose tail Hose tail
The Hose tail PP male thread x barbed 4bar black is made from Polyethylene and has a barbed x male thread connection. All diameters of the fitting correspond to the outside diameter of PE pipes. Irritec is the leading Italian...
From £ 0.14 *
  • Material: PP
  • Color: black
  • Pressure: 4 bar
Elbow 90° Elbow 90°
The Elbow barb connector 90° has a 90 degree angle which makes it easy to connect multiple Polythelene (PE) pipes. The barbed connections on the fitting make it possible to create a tight seal between two PE pipes. The fitting has a barb...
From £ 0.09 *
  • Material: PP
  • Color: black
  • Pressure: 4 bar
Elbow 90° Elbow 90°
The Elbow male thread x barbed connector 90° is suitable for projects where a 90 degree connection should be made between two Polythelene (PE) pipes. The fitting has a male thread x barbed connection, all diameters correspond to the...
From £ 0.17 *
  • Material: PP
  • Color: black
  • Pressure: 4 bar
1 From 6
Viewed